OVAL SET w/ Over-sized Ball & Harness UPGRADE - System & Mesh Cover
FREE SHIPPING on all Systems & Sets!!
The PoolTree System was designed to work best when used with a mesh (or porous) cover. Mesh covers allow water to drain through the cover while keeping dirt, debris, leaves and insects out. A typical installation of a mesh cover requires the cover to sit on the surface of the water, which means it is always wet and full of leaves. The PoolTree System holds the cover off the surface of the water, which allows rain and snow to drain through. Once the cover has drained, it dries and solid debris blows away in the wind. It's the ONLY self-cleaning above ground pool cover system on the market! A few benefits are:
- No need to pump the cover continuously through the fall months
- No need to scoop leaves when installed correctly, the leaves blow away
- No risk of heavy ice or water pulling on your pool if not pumped properly
- No leaves decaying and mulching through the cover into the pool in the winter months
- Easy opening because the cover is dry and free of leaves
The PoolTree System consists of a heavy duty ball (1000lb+ burst pressure), unique harness, expandable bungee support straps with patented connectors and nylon straps. The System flexes into the pool when water or snow weighs it down, then pulls itself out of the water so the cover is allowed to drain (with mesh cover).
The oversize (40") ball is approximately 35% larger than the original ball/harness and is a nice upgrade for pools with spans larger than 30'.
*Can also be used with a solid pool cover but the cover needs to be pumped when it accumulates water. With a solid cover, the PoolTree System holds the water and leaves against the side of the pool so they are easier to reach.
IF YOU NEED REPLACEMENT PARTS, CLICK HERE.